I am getting ready to print out QSL labels for the first time and would like PSE or TNX to print out on the contact line. It appears in order to get PSE to print out, the QSL_RCVD field needs to have an R in it. Likewise QSL_RCVD needs to have an 'F' in it for TNX.

What I would like to do, using the selection that is being use to select the QSOs for labels, is use that same selection to set the QSO_RCVD field to 'R'. I would set the QSL_RCVD field to 'F' prior to the label selection.

Below is an example selection statement.
LOTW_RCVD<>'F' AND (MODE='SSB' or mode='USB' or mode='LSB') AND QSO_DATE>={^2000-01-01} AND NOT EMPTY(VIA) AND QSL_RCVD<>'F'

Is there a way to do this automagically or does it need to be done manually.

Thanks,

Fred

Dennis,

Thanks for getting back to me so quickly. I tried to use the Database files->Mass change->Replace field contents and pasted in my selection criteria:

LOTW_RCVD<>'F' AND (MODE='SSB' or mode='USB' or mode='LSB') AND QSO_DATE>={^2000-01-01} AND NOT EMPTY(VIA) AND QSL_RCVD<>'F'

However there appears to be a length limit because only the following got pasted in:

LOTW_RCVD<>'F' AND (MODE='SSB' OR MODE='USB' OR MODE='LSB') AND QSO_DATE>={^2000-01-01} AND NOT EMPTY(VIA) AND QSL_RCVD<

This is 120 bytes and I need at least 124.

I wanted to use the Replace field contents so I could verify the number of records that would be changed and also look at them like in the video.

Thanks,

Fred

Dennis,

Followed your suggestions and they worked like a champ.

Thanks,

Fred