logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Winkeyer form in Logic and Updated Firmware in Winkeyer
Options View
Previous Topic Next Topic
WB4HUC
#1 Posted : Thursday, September 12, 2019 1:16:54 PM(UTC)
Rank: Member

Groups: Registered
Posts: 22
Location: Austin, TX

Was thanked: 5 time(s) in 5 post(s)
Hello,

I recently updated the firmware in my WinKeyer USB to version 3.01.02 as shown in
the attached Winkeyer tools image capture.

When I bring up the WinKeyer form in Logic I get the message in the attached Winkeyer
form screen capture.

Seems like the Winkeyer firmware update changed something.

I should say that I'm using Logic Version 9.1.42.

Thanks,

Mike - WB4HUC
Austin, TX
File Attachment(s):
winkeyer_tools_image_capture.jpg (113kb) downloaded 11 time(s).
logic_winkeyer_form_screen_capture.jpg (73kb) downloaded 12 time(s).
logic_version_screen_capture.jpg (94kb) downloaded 9 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
 |  Edit by user
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top  
WN4AZY
#2 Posted : Tuesday, September 17, 2019 2:43:41 PM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Hi Mike:

Sorry for the problem.

Please download and install 9.1.42 again. It will now display what is actually being returned by WinKeyer, and will ignore the bad return value and attempt to continue. Try that and see what happens.

Also, if you can provide a link to the documentation for the new firmware, that would be great.

Tnx & 73,

Dennis WN4AZY
Back to top
WWW
WB4HUC
#3 Posted : Thursday, September 19, 2019 9:47:50 AM(UTC)
Rank: Member

Groups: Registered
Posts: 22
Location: Austin, TX

Was thanked: 5 time(s) in 5 post(s)
The Winkeyer USB is now working. Thanks for the quick update.

Here is the link to the Winkeyer firmware update:

https://www.k1elsystems.com/WinKeyer_31.html

Apparently there are two or three models of hardware, and there is a different update file for each
hardware version. My keyer is the Winkeyer with the SMT IC.

Thanks,

Mike - WB4HUC
Back to top
IK0CHU
#4 Posted : Thursday, September 19, 2019 6:35:42 PM(UTC)
RedBaron

Rank: Advanced Member

Groups: Registered
Posts: 365
Man
Location: Viterbo, VT - ITALY

Thanks: 57 times
Was thanked: 85 time(s) in 79 post(s)

Hello Mike,
I have always used HamGadgets' Masterkeyer MK-1 with Logic9, but after your post about the USB Winkeyer I had the curiosity to try.
I attach some screenshots before and after updating the USB Winkeyer with the Logic update.
All OK but the strange thing that the Firmware turns out to be version 85. It also happens to you ??
73's de IK0CHU Mauro
***
File Attachment(s):
ScreenShot844.jpg (39kb) downloaded 4 time(s).
ScreenShot845.jpg (12kb) downloaded 3 time(s).
ScreenShot846.jpg (31kb) downloaded 6 time(s).
ScreenShot847.jpg (73kb) downloaded 3 time(s).

You cannot view/download attachments. Try to login or register.
IKØCHU Mauro
Back to top
WB4HUC
#5 Posted : Friday, September 20, 2019 8:34:59 AM(UTC)
Rank: Member

Groups: Registered
Posts: 22
Location: Austin, TX

Was thanked: 5 time(s) in 5 post(s)
Yes, my WinKeyer form in Logic shows the same as yours...version 85.
Back to top
IK0CHU
#6 Posted : Friday, September 20, 2019 11:41:40 AM(UTC)
RedBaron

Rank: Advanced Member

Groups: Registered
Posts: 365
Man
Location: Viterbo, VT - ITALY

Thanks: 57 times
Was thanked: 85 time(s) in 79 post(s)

Hello Mike,
thank you for the confirmation.
I had the chance to try the Winkey v31 (RTTY) with other contest programs and Logbook but the reading of the version is correct.
If you have time try it yourself so that we have cross-checks.
However important it works and if the version number is projected towards the future it is better so we can say that we are at the forefront. (Winkeyer UFO 85) Eheheh

Thanks Mauro
***
IKØCHU Mauro
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.041 seconds.