New Rigs with USB ports ? - Serial port and level converter support

Welcome Guest! To enable all features please Login or Register.

Notification

Error

LOGic Forum » Hardware Support » Serial port and level converter support » New Rigs with USB ports ?

2 Pages12 >

New Rigs with USB ports ?

Options View

Previous Topic Next Topic

K2WH		#1 Posted : Tuesday, May 29, 2018 9:49:49 AM(UTC)
Rank: Advanced Member Groups: Registered Posts: 79 Location: New Jersey Thanks: 4 times Was thanked: 7 time(s) in 6 post(s)		Dennis, I have a Yaesu FTdx3000 that has a USB port for data input and output, audio and switching. It also has a serial port but I would like to use the USB port since it is so easy to use. Are there any plans to include USB support in the future? Bill K2WH
Back to top

User Profile View All Posts by User View Thanks
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top

W5RAE		#2 Posted : Tuesday, May 29, 2018 10:46:21 AM(UTC)
Rank: Advanced Member Groups: Registered Posts: 46 Location: Plano, TX Was thanked: 8 time(s) in 8 post(s)		Bill, It's already supported. I have an FTDX-3000 and it is interfaced with LOGic9 using the USB enhanced port and works great. My setup is: rig FT-9000,FT-5000,FT-2000, COM8, 38400 baud, 2 stop bits Hope this helps, 73, Ron W5RAE
Back to top
1 user thanked W5RAE for this useful post.		WN4AZY on 5/29/2018(UTC)
User Profile View All Posts by User View Thanks

K2WH		#3 Posted : Sunday, June 3, 2018 6:58:26 AM(UTC)
Rank: Advanced Member Groups: Registered Posts: 79 Location: New Jersey Thanks: 4 times Was thanked: 7 time(s) in 6 post(s)		Originally Posted by: W5RAE Bill, It's already supported. I have an FTDX-3000 and it is interfaced with LOGic9 using the USB enhanced port and works great. My setup is: rig FT-9000,FT-5000,FT-2000, COM8, 38400 baud, 2 stop bits Hope this helps, 73, Ron W5RAE
Back to top

User Profile View All Posts by User View Thanks

K2WH		#4 Posted : Sunday, June 3, 2018 7:06:02 AM(UTC)
Rank: Advanced Member Groups: Registered Posts: 79 Location: New Jersey Thanks: 4 times Was thanked: 7 time(s) in 6 post(s)		I'm not sure how to use this site in replying, somewhat confusing since I already replied and my reply has not shown up. Anyway, thanks for your response, but the FTdx3000 is not listed as a supported rig. Secondly, if I Tools, Setup, Rig, there are numerous tabs. Which one do I select? Radio IFC or Radio Terminal and what settings do I choose ? Bill K2WH
Back to top

User Profile View All Posts by User View Thanks

W5RAE		#5 Posted : Monday, June 4, 2018 10:48:27 AM(UTC)
Rank: Advanced Member Groups: Registered Posts: 46 Location: Plano, TX Was thanked: 8 time(s) in 8 post(s)		Bill, select Radio IFC, then select: rig FT-9000,FT-5000,FT-2000, your COM port #, select baud rate you have on the 3000, 2 stop bits 73, Ron W5RAE
Back to top
1 user thanked W5RAE for this useful post.		WN4AZY on 6/4/2018(UTC)
User Profile View All Posts by User View Thanks

WN4AZY		#6 Posted : Monday, June 4, 2018 12:21:53 PM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		I'll add the FT-3000 to the list of rigs in the description of that interface. Tnx & 73, Dennis WN4AZY
Back to top		WWW

User Profile View All Posts by User View Thanks

WN4AZY		#7 Posted : Tuesday, June 5, 2018 3:14:15 PM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Unfortunately rigs with USB ports do not simplify anything. They save a little money and clutter is all. They are simply built-in USB=>RS232 converters. They are still seen as a regular old Com port by Windows and LOGic. You still have to know the proper baud rate, etc. Not at all like plugging in a mouse or camera. Maybe someday....
Back to top		WWW

User Profile View All Posts by User View Thanks

w0yv		#8 Posted : Monday, August 27, 2018 8:30:18 PM(UTC)
Rank: Newbie Groups: Registered Posts: 1 Location: robins		Dennis, I have a FT-991a and the USB to USB port connection using ftdx3000/5000/9000 definitions does not work. I have tried on different computers and numerous COM settings and get the same results. Logic does not crash and seems to communicate with the FT-991a when the COM settings are all correct in computer and radio and Logic. Logic displays the radio's frequency 14.250Mhz as .14250. The mode buttons will change the radio modes but then switch back to showing the first button as pressed. I have used other programs (Fldigi and WSJT-X) with the USB to USB connection and it works on a FT991a definition but won't work if using a FT9000 or FT5000 definition. So if you get a chance it would be great if you can figure out the slight differences between the FT991a and FTdx3000 CAT commands and create a fully working FT-991a definition.
Back to top		WWW

User Profile View All Posts by User View Thanks

WN4AZY		#9 Posted : Tuesday, August 28, 2018 9:14:27 AM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Hi-- I looked at the CAT commands and responses for the 991a and they look in the ballpark for the newer Yeasus -- similar to Kenwood: https://static.dxenginee...es/y/ysu-ft-991a_us.pdf Please do this for me. Try the legacy interface, #15. Let me know if it works. My notes say it works with that. But probably that is wrong since you tried the FT-5000 on other programs. Then switch back to the new interface, #52. Turn COM PORT DATA LOGGER on in the General tab. Operate the rig a minute or so, then turn off the data logger. Send me the result. It will be in LOGic's TMP folder, probably c:\program files (x86)\logic\tmp. I will fix it for you. Tnx & 73, Dennis WN4AZY
Back to top		WWW

User Profile View All Posts by User View Thanks

N2LVI		#10 Posted : Tuesday, April 2, 2019 10:05:31 PM(UTC)
Rank: Newbie Groups: Registered Posts: 4 Location: New Jersey		Originally Posted by: WN4AZY Hi-- I looked at the CAT commands and responses for the 991a and they look in the ballpark for the newer Yeasus -- similar to Kenwood: https://static.dxenginee...es/y/ysu-ft-991a_us.pdf Please do this for me. Try the legacy interface, #15. Let me know if it works. My notes say it works with that. But probably that is wrong since you tried the FT-5000 on other programs. Then switch back to the new interface, #52. Turn COM PORT DATA LOGGER on in the General tab. Operate the rig a minute or so, then turn off the data logger. Send me the result. It will be in LOGic's TMP folder, probably c:\program files (x86)\logic\tmp. I will fix it for you. Tnx & 73, Dennis WN4AZY Was this problem with the FT-991A ever resolved? I'm trying out the demo program, but if it doesn't work with the FT-991A, the LOGic software is not as useful. I have the same problem with the frequency listed as 1/10 of the actual freq (eg, 1.4250 vs 14.250), shows wrong mode, VFO frequency does not get updated in the log form, etc.
Back to top

User Profile View All Posts by User View Thanks

wa4pgm		#11 Posted : Wednesday, April 3, 2019 3:46:53 PM(UTC)
Rank: Advanced Member Groups: Administrators, Registered, Beta Testers Posts: 369 Location: Farmville, VA Thanks: 36 times Was thanked: 224 time(s) in 193 post(s)		Dennis, I tried 15 and 52 and neither worked with my 991. I don't have the 991A but they should be the same. I captured the ComportDataLogger file and attached it here. File Attachment(s): COM3_Log.txt (20kb) downloaded 69 time(s).
Back to top		\| Edit by user
1 user thanked wa4pgm for this useful post.		WN4AZY on 4/5/2019(UTC)
User Profile View All Posts by User View Thanks

WN4AZY		#12 Posted : Friday, April 5, 2019 2:12:41 PM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Thanks Kyle--that's exactly what I need. I'll look at it. Tnx & 73, Dennis WN4AZY
Back to top		WWW

User Profile View All Posts by User View Thanks

N2LVI		#13 Posted : Sunday, April 14, 2019 8:47:33 PM(UTC)
Rank: Newbie Groups: Registered Posts: 4 Location: New Jersey		Any progress in getting the FT-991/991A working properly? I'm anxious to try this software out. Thanks!
Back to top

User Profile View All Posts by User View Thanks

WN4AZY		#14 Posted : Friday, May 3, 2019 10:11:34 AM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Try the new 9.1.41 update. Let me know how it works. Tnx & 73, Dennis WN4AZY
Back to top		WWW

User Profile View All Posts by User View Thanks

wa4pgm		#15 Posted : Friday, May 3, 2019 11:33:59 AM(UTC)
Rank: Advanced Member Groups: Administrators, Registered, Beta Testers Posts: 369 Location: Farmville, VA Thanks: 36 times Was thanked: 224 time(s) in 193 post(s)		Not working here. Logic displays the radio's frequency 14.250Mhz as 1.4250 for example. See attached file. File Attachment(s): COM3_Log.txt (40kb) downloaded 71 time(s).
Back to top
1 user thanked wa4pgm for this useful post.		WN4AZY on 7/7/2019(UTC)
User Profile View All Posts by User View Thanks

N2LVI		#16 Posted : Monday, July 1, 2019 10:30:52 PM(UTC)
Rank: Newbie Groups: Registered Posts: 4 Location: New Jersey		Still no support for the FT-991A? The latest version still displays the frequency shifted one decimal place (see WA4PGM's comments).
Back to top

User Profile View All Posts by User View Thanks

WN4AZY		#17 Posted : Sunday, July 7, 2019 2:36:44 PM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Thanks for the post. I missed Kyle's post. I'll work on it today. Should be a simple fix (famous last words). Tnx & 73, Dennis WN4AZY
Back to top		WWW

User Profile View All Posts by User View Thanks

WN4AZY		#18 Posted : Monday, July 8, 2019 4:55:53 AM(UTC)
Rank: Administration Groups: Administrators, Beta Testers Posts: 3,096 Location: Auburn, GA Thanks: 997 times Was thanked: 497 time(s) in 412 post(s)		Ok, try it again. Please re-download and install 9.1.41. Tnx/73, DH
Back to top		WWW

User Profile View All Posts by User View Thanks

wa4pgm		#19 Posted : Monday, July 8, 2019 6:26:39 AM(UTC)
Rank: Advanced Member Groups: Administrators, Registered, Beta Testers Posts: 369 Location: Farmville, VA Thanks: 36 times Was thanked: 224 time(s) in 193 post(s)		9.1.41 downloaded and installed not working here. 3.542 is displayed as 3.354200 14.250 is 14.425000 21.017 is 21.101700 etc......
Back to top

User Profile View All Posts by User View Thanks

wa4pgm		#20 Posted : Monday, July 8, 2019 2:44:55 PM(UTC)
Rank: Advanced Member Groups: Administrators, Registered, Beta Testers Posts: 369 Location: Farmville, VA Thanks: 36 times Was thanked: 224 time(s) in 193 post(s)		I forgot to attach COM port logger File Attachment(s): COM3_Log.txt (118kb) downloaded 0 time(s).
Back to top
1 user thanked wa4pgm for this useful post.		WN4AZY on 7/8/2019(UTC)
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

2 Pages12 >

LOGic Forum » Hardware Support » Serial port and level converter support » New Rigs with USB ports ?

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.