logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
HamScope and LOGic 9.0.72 on Windows 7 x32 not talking
Options View
Previous Topic Next Topic
w2zi
#1 Posted : Tuesday, April 14, 2015 11:53:31 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 180
Man
Location: Daytona Beach, Florida

Thanks: 48 times
Was thanked: 67 time(s) in 62 post(s)
Hi all. I rebuilt my 3Ghz desktop with an SSD and Windows 7 x32. Things are fast and LOGic 9.0.72 works great. HamScope 1.56 by itself works but does not seem to be able to talk to LOGic. This all used to work under Windows XP. (I've tried swapping back in the XP hard disk and it works.)

I've tried 'HamScope 1' form as well as the 'Log It' button. No luck.

This all used to work.

Any thoughts?

Thanks & 73s

Don, W2ZI

ADDED:

I've read lots of old posts and tried a few of suggestions including logicserver /regserver
from an elevated prompt. None helped.

Has anyone (with it broken) gotten it to work (and what you did?
Did you give up and move to another program?

Thanks.
Back to top
 |  Edit by user
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top  
K8ZM
#2 Posted : Tuesday, April 28, 2015 9:01:23 PM(UTC)
bwilliams

Rank: Advanced Member

Groups: Registered
Posts: 524
Location: Mentor, OH

Thanks: 123 times
Was thanked: 185 time(s) in 166 post(s)
Don,

Not sure if you got anything back on this, if not, here goes;

I had issues with Hamscope awhile ago. Note that it hasn't been "updated" for years and support is non-existent, its not representative of all the digital modes currently available either. Having said all that, it does work.

I'm running windows 8.1, have Hamscope and LOGic running concurrently. The hamscope window(s) work from within LOGic v.9.0.72.

In my Hamscope, General Setup: Under Rig Control, I have COM Port set to the correct com port for my Radio (Com 3) and Radio set to LOGic 6, with Rig Baud set to my rigs baud rate (9600), then, I have Log Program set to LOGic 7.

Usually, I launch LOGic first, then open the Hamscope window, then launch Hamscope. In Hamscope, a mouse click on Rig Control brings up that window and it should be reading the frequency of your rig...seemingly in sync with LOGic.

If you did get something going, please ignore this reply.

Regards,

Brad, N8GLS
Back to top
WWW
w2zi
#3 Posted : Thursday, May 7, 2015 12:22:50 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 180
Man
Location: Daytona Beach, Florida

Thanks: 48 times
Was thanked: 67 time(s) in 62 post(s)
Brad,
Thanks for the reply. I've tried your suggestion but no joy. I have a Ten-Tec Omni VII. The COM port is locked at
57600,N,8,1 and HamScope will only go to 56000 (strange speed). That seems a dead end though I do have a message out
to Te-Tec (now RKR Designs) for a fix.

In any case it should have been able to "speak" as far as the data windows and the "Log It" button. These did work
in Windows XP but not in Windows 7.

Perhaps Dennis will have a flash of insight.

Thanks & 73's, Don
Back to top
WN4AZY
#4 Posted : Thursday, May 14, 2015 8:49:53 PM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Does HamScope support OmniRig per chance? I gotta get going on FLDigi....
Back to top
WWW
IK0CHU
#5 Posted : Sunday, May 17, 2015 12:53:55 PM(UTC)
RedBaron

Rank: Advanced Member

Groups: Registered
Posts: 365
Man
Location: Viterbo, VT - ITALY

Thanks: 57 times
Was thanked: 85 time(s) in 79 post(s)

Hi Dennis,
have You tried to consider to interface Airlink Express, by KR1ST, which works very very fine in both RTTY that PSK 31,63,125,250? Take a look.
73's de IKØCHU Mauro
***
IKØCHU Mauro
Back to top
WN4AZY
#6 Posted : Monday, May 18, 2015 7:21:48 PM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Does it have an interface to external programs. FLDigi is open-source. However, I wish it was written in .net, which it isn't.

Tnx/73,

DH
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.041 seconds.