Dennis, I'd like to automate my antenna switching. In LOGic 8, it appears that the only way to accomplish this is via a parallel port...is there another way, as most computers don't have parallel ports these days? Or maybe I've missed something obvious? I've already got the switch, and it's good for either sinking or sourcing input.

Thanks!

73 Doug W5GA

Well, I've got a controller...but it's RS-232. Will Logic address that via the setup menu items? If so, I should be able to address it via a USB/RS-232 converter.

I'm using this...
http://www.elecraft.com/KRC2/krc2.htm

Yes, that's how it's supposed to work. Here's the issue...I'm using a TenTec Omni 6, and interfacing it to the computer (and Logic) via a USB/RS-232 converter. There's a second port on the radio to use Icom CI-V control, but you can't use both ports at the same time as best I can tell, so I can't see a way to get the decoder to interface to the radio and still have the radio interfaced to Logic. If I could address the band decoder with USB/RS-232 via Logic, that would fix the issue. Of course this assumes that Logic would pass that band data in that manner via one of the setup menu interface selections.