I have found recently that *sometimes* I cannot enter a prefix into the "Enter Prefix" box in the Info window. After clicking "Select by Name", the "Enter Prefix" box then works. I don't know in what update this started.

When I move my mouse there, I cannot enter anything. There is no curser there. If I click in the "Select by Name" box then I can enter something into the "Enter Prefix" box. It is as if that window is not active until I click in the "Select by Name" box. I have not tried clicking anywhere else. Note that prior to doing this, I am in the logging window.

As I mentioned before, the problem is intermittent and sometimes when I click in the "Enter Prefix" field it does not work. I have to click in the "Select by Name" field first, then I can click in the "Enter Prefix" field and enter the prefix.



While we are on the subject on the "Info" window, could you add some rotor control buttons for Short Path and Long Path adjacent to the "To" fields? Sure would be helpful.

Thanks,

[quote=WN4AZY;10624]Do you always press {Enter} or {Tab} after entering the prefix? Either should work. If it happens again, try both {Tab} and {Enter}. I played with it some more and can't get it to fail.

I'll try to explain it again: "Sometimes" when I click inside of the "Enter Prefix" field, I do not even get a cursor and therefore cannot enter the prefix at all. My workaround is to click in the "Select by Name" field, at which time I see the entire window "flash" for lack of a better term, and then I can click in the "Enter Prefix" field to get a cursor which then allows me to enter whatever prefix I need to. I did find at that point that either pressing Enter or Tab will work.

This is an intermittent problem and at least I have found an easy workaround so the function is useful.

ON the rotor control function, I did not know about <alt> S and <alt> L. I will have to try it. Thanks,
Another user suggested at one time to allow use of the Set rig and rotor control function(s) while WSJT is running and the CAT interface is turned off. Is that a possible feature we can look forward to seeing? Currently, when I have WSJT running, and click on Set rig, S or L in the Spot Log window, nothing happens because I have turned off the radio and rotor interfaces.

Another issue with the "Info" window is that clicking on "NOAA" results in a "Can't find this page" [http://weather.noaa.gov/weather/current/OKBK.html] Maybe the link has changed.

That is all for now.

I'll let you know next time the problem occurs.