logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
I need a 2nd Serial Port
Options View
Previous Topic Next Topic
KK6BT
#1 Posted : Tuesday, March 13, 2012 8:07:22 AM(UTC)
Rank: Member

Groups: Registered
Posts: 12
Location: Beaufort, SC

Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
I use the DB9 serial connector on my Yaesu 5000 to connect to LOGic 9 via a serial to USB adapter. Now I want to add a pan-adapter so I can view the signals near the frequency I have tuned my rig to. The problem is, the pan-adapter needs a DB9 to DB9 cable connected to the one and only DB9 serial connector on my rig. How can I have my cake and eat it to?

Thanks for any suggestions.
Back to top
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top  
WN4AZY
#2 Posted : Tuesday, March 13, 2012 9:58:21 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Ok, I am not familiar with that particular hardware configuration. Perhaps someone else here will know more.

From what little I know about it: First of all, it is unusual for scope data to be sent via an RS-232 port -- there is a lot of data there and not much bandwidth. But perhaps the RS232 port is used to merely let the PanAdapter know where center freq is, and it may get the RF sample elsewhere. If that is the case, a simple Y cable may work.
http://hosenose.com/stor...mp;PrimaryCatID=46&

I would pick up the phone and call (or email) the makers of the Panadapter and say "Hey, I have an FT-5000. I am using the CAT feature to talk to my logging program. How do I set up the Panadapter?"

Let us know.

Tnx & 73,

DH
Back to top
WWW
KK6BT
#3 Posted : Tuesday, March 13, 2012 3:50:25 PM(UTC)
Rank: Member

Groups: Registered
Posts: 12
Location: Beaufort, SC

Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
Hi Dennis,

You are right, the RS-232 port is only used by the pan-adapter so it knows where the center frequency is. The Rf originates from a seperate connector on the back of the FT-5000. Like you, my first thought was a Y cable. I first went to Cables to Go and couldn't find one. Then I searched the web and couldn't find one. It may be most circuits that provide the data to the RS-232 port can only drive one component, not 2 --just a thought.

I wish it were so simple as to just pick up the phone and call the pan-adapter people. But, they don't disclose their phone number so you can only communicate by e-mail (they don't give the great service you do!).

I will try the e-mail route and see if I get anywhere.

Thanks
Back to top
WN4AZY
#4 Posted : Thursday, March 15, 2012 8:11:17 PM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
I provided a link to the Y cables we sell in my last post. We had a hard time finding them too. I think that is all we order from that supplier -- our usual supplier does not have them either.

RS-232 is pretty forgiving. It is supposed to have a 50' limit. But we've used it over 1500' using minimally-shielded cables strung thru trees. If the FT-5000 is like most stuff it should have enough output.

They don't have a phone#? Must not be very hungry hihi.
Back to top
WWW
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.030 seconds.