Dennis, I can't get Logic to log into VE7CC. My setup is shown below:

prompt wait response
CALL: 5 MYCALL
LOGIN: 5 MYCALL

The following is the transcript of the login --->

---

Please enter your call:

*** Connected to VE7CC-1:
Greetings from the VE7CC-1 cluster.
Located near Vancouver BC
Running CC Cluster software version 3.121ap

*************************************************************************
* *
* Please login with a callsign indicating your correct country *
* Portable calls are ok. *
* *
*************************************************************************

New commands:

set/skimmer turns on Skimmer spots.
set/noskimmer turns off Skimmer spots.

set/ft4 turns on FT4 spots
set/noft4 turns off FT4 spots

set/ft8 turns on FT8 spots.
set/noft8 turns off FT8 spots.

also:

set/cw
set/nocw

set/rtty
set/nortty

set/psk
set/nopsk

set/nobeacon turns off spots for beacons.
set/beacon turns them back on.

For information on CC Cluster software see:
http://bcdxc.org/ve7cc/ccc/CCC_Commands.htm

AR User program now at ver. 2.447
login:
LOGic> Waited for CALL: to be sent by host, but it was not.
LOGic> Check Setup.

VE7CC is not having issues. This has been a problem with my copy of Logic for over a year. I'm just now getting around to trying to find a solution. Sometimes it connects and sometimes it does not. After it gets stuck, I can always successfully connect by hitting the connect button. Timing?

Bob

Thanks for your comments. Yes, that is exactly my setup. I can immediately sign into other clusters but since the VE7CC problem does not happen on every attempt, it's hard to draw a conclusion from trying another site.

Bob

I can't comment on the VE7CC node but my usual is the following:

address: CCC.N4ZKF.COM:7373
prompt: LOGIN:_
wait: 4
response: mycall

Only problems I've had are when my Internet is misbehaving.

73s, Don