Hi recently installed 9.53 and now logic9 hangs when starting up the spot window. I'm using windows 7, binging up the task manager and killing the hung program causes it to clean on the next program restart and everything is fine until I shut down the PC and start Logic again.

I Rolled back to 9.50 but the problem continues.

Any help you can offer would be great.

Thanks for the reply Dennis, No hardware changes here. I performed the delition you outlined to the forms file, unfortuntialy it still locked up after compleation of the spot download. Anything else I could try?

Thanks

Ok, so if you do a CLEAN, it works fine, spotting and all, until you turn off and reboot your computer? Then you have to do a CLEAN again?

Perfromed more troubleshooting tonight. I disconnected all of the usb devices and found that Logic will start normally (execpt for error messages due to unconnected devices).

Reconnecting one at a time I find logic hangs on startup when Winkeyer is connected. Ulplugging the keyer causes the program to terminate. Also using a different USB port will allow the program to start, but when I exit logic I get (Winkeyform Ref error). On the next start up of logic I have to reselect the com port for the keyer.

I unstalled the comport that winker uses,then reinstalled it, but I get the same results.

Thanks for the info.

Do you have some sort of WinKeyer with a built-in USB=>RS232 converter? Mine just has a 9-pin RS-232 port on it and therefore does not have drivers.

Tnx & 73,

Dennis WN4AZY

Writing those USB => RS232 drivers must be a real black art. It seems almost no one gets it right :-(

73,

Dennis