logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
9.0.78
Options View
Previous Topic Next Topic
N5XZ
#1 Posted : Tuesday, October 6, 2015 8:37:22 PM(UTC)
Rank: Advanced Member

Groups: Registered, Beta Testers
Posts: 409
Location: Richmond, TX

Thanks: 35 times
Was thanked: 57 time(s) in 54 post(s)
Just downloaded 9.0.78, now it seems that Spot Log does not work. I see spots on telnet, but nothing new on spot log.

Sending DX spot works (I see it on telnet) but even the test on the spot log does not put it on the cluster.

New error message just popped up.
File Attachment(s):
Capture.JPG (46kb) downloaded 56 time(s).
73, Allen N5XZ
Back to top
Sponsor
Note: We receive a commission from Amazon when you purchase via this link. It does not affect your cost. Thank you!
Back to top  
KD0PO
#2 Posted : Tuesday, October 6, 2015 9:29:58 PM(UTC)
dokxray

Rank: Advanced Member

Groups: Registered
Posts: 53
Location: USA

Thanks: 3 times
Was thanked: 8 time(s) in 7 post(s)
this isn't new to the new version but it still doesn't work.

on the Logic World Map there is a button marked "setup" if I click it, the World map window freezes. I have to quit logic and re-start to un-freeze it.

Thanks for your many many hours Dennis.

Ray KD0PO
Back to top
W5GA
#3 Posted : Tuesday, October 6, 2015 11:54:03 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 395
Location: Missouri

Thanks: 72 times
Was thanked: 118 time(s) in 105 post(s)
The first update in a long line of updates that didn't trigger a warning from my anti-virus (Avast), for whatever that may be worth.

73 Doug W5GA
73 Doug W5GA
Back to top
WN4AZY
#4 Posted : Wednesday, October 7, 2015 8:29:43 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Originally Posted by: "N5XZ" Go to Quoted Post
Just downloaded 9.0.78, now it seems that Spot Log does not work. I see spots on telnet, but nothing new on spot log.
Make sure the prefilter in the spot log is not catching them. Turn it off and see if you get anything.

Never seen that error before. Will research it. Was it a one-time thing?

Originally Posted by: "KD0OP" Go to Quoted Post
this isn't new to the new version but it still doesn't work.

on the Logic World Map there is a button marked "setup" if I click it, the World map window freezes. I have to quit logic and re-start to un-freeze it.
I'll bet the config window is off-screen, so it just looks like it is hung. To fix, go into the LOGic install folder (typically C:\Usr\pda\VSProjects\PDA\LOGic\LOGic9\LOGic9). Look for worldmap.config. Delete it, or if you don't want to have to redo your world map settings, edit it in Notepad and change the ConfigForm top and left to 0.


Originally Posted by: "W5GA" Go to Quoted Post
The first update in a long line of updates that didn't trigger a warning from my anti-virus (Avast), for whatever that may be worth.
Cool, but I didn't do anything. Maybe they coincidentally fixed Avast.

Tnx & 73,

Dennis WN4AZY
Back to top
WWW
 |  Edit by user
KD0PO
#5 Posted : Wednesday, October 7, 2015 10:15:05 AM(UTC)
dokxray

Rank: Advanced Member

Groups: Registered
Posts: 53
Location: USA

Thanks: 3 times
Was thanked: 8 time(s) in 7 post(s)
Originally Posted by: WN4AZY Go to Quoted Post
Originally Posted by: "N5XZ" Go to Quoted Post
Just downloaded 9.0.78, now it seems that Spot Log does not work. I see spots on telnet, but nothing new on spot log.
Make sure the prefilter in the spot log is not catching them. Turn it off and see if you get anything.

Never seen that error before. Will research it. Was it a one-time thing?

Originally Posted by: "KD0OP" Go to Quoted Post
this isn't new to the new version but it still doesn't work.

on the Logic World Map there is a button marked "setup" if I click it, the World map window freezes. I have to quit logic and re-start to un-freeze it.
I'll bet the config window is off-screen, so it just looks like it is hung. To fix, go into the LOGic install folder (typically C:\Usr\pda\VSProjects\PDA\LOGic\LOGic9\LOGic9). Look for worldmap.config. Delete it, or if you don't want to have to redo your world map settings, edit it in Notepad and change the ConfigForm top and left to 0.


Originally Posted by: "W5GA" Go to Quoted Post
The first update in a long line of updates that didn't trigger a warning from my anti-virus (Avast), for whatever that may be worth.
Cool, but I didn't do anything. Maybe they coincidentally fixed Avast.

Tnx & 73,

Dennis WN4AZY


Thanks again for everything

Ray
Back to top
W5GA
#6 Posted : Wednesday, October 7, 2015 3:20:53 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 395
Location: Missouri

Thanks: 72 times
Was thanked: 118 time(s) in 105 post(s)
Dennis, .78 giving this error:

Also, spotlog is broken, not receiving any spots from telnet...prefilter disabled.
File Attachment(s):
logic error.PNG (15kb) downloaded 41 time(s).
73 Doug W5GA
Back to top
 |  Edit by user
N5XZ
#8 Posted : Wednesday, October 7, 2015 10:46:55 PM(UTC)
Rank: Advanced Member

Groups: Registered, Beta Testers
Posts: 409
Location: Richmond, TX

Thanks: 35 times
Was thanked: 57 time(s) in 54 post(s)
Yup. Made no changes to spot log config. Something else is broken.
73, Allen N5XZ
Back to top
WN4AZY
#7 Posted : Thursday, October 8, 2015 8:06:59 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Originally Posted by: W5GA Go to Quoted Post
Dennis, .78 giving this error:

Also, spotlog is broken, not receiving any spots from telnet...prefilter disabled.

Can you reproduce this error? Look in the telnet window and see what spot posted before it croaked. This is different than the error I fixed in .78 BTW.

Alan, I would like to log onto your machine and see what is going on. Mine is receiving and processing spots from K4UGA telnet no problem.

73,

Dennis WN4AZY
Back to top
WWW
WN4AZY
#9 Posted : Thursday, October 8, 2015 9:45:34 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Ok, mia culpa. I downloaded the .78 from the forum as apposed to installing my original, and it would not do prefix lookups or spot either. The prefix table had only about 500 prefixes when it reindexed. So pse download again. I made some other code changes, not relevant I think, but just so we know what page we are on. I tested this one from the server hihi.

73,

Dennis WN4AZY
Back to top
WWW
N5XZ
#10 Posted : Thursday, October 8, 2015 9:46:34 AM(UTC)
Rank: Advanced Member

Groups: Registered, Beta Testers
Posts: 409
Location: Richmond, TX

Thanks: 35 times
Was thanked: 57 time(s) in 54 post(s)
Dennis,

Perhaps you can log into W5GA's machine as I am working and won't be available until Friday afternoon. He has the same issue. Otherwise, I will contact you off list to arrange for a time.

Thanks,
73, Allen N5XZ
Back to top
W5GA
#11 Posted : Thursday, October 8, 2015 11:58:01 AM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 395
Location: Missouri

Thanks: 72 times
Was thanked: 118 time(s) in 105 post(s)
Dennis, I'll try the latest patch but it wont be until later tonight that I can do it. I'll let you know.
73 Doug W5GA
Back to top
W5GA
#12 Posted : Thursday, October 8, 2015 9:30:41 PM(UTC)
Rank: Advanced Member

Groups: Registered
Posts: 395
Location: Missouri

Thanks: 72 times
Was thanked: 118 time(s) in 105 post(s)
so far, .79 has me fixed.
73 Doug W5GA
Back to top
K8ZM
#13 Posted : Thursday, October 8, 2015 10:25:21 PM(UTC)
bwilliams

Rank: Advanced Member

Groups: Registered
Posts: 524
Location: Mentor, OH

Thanks: 123 times
Was thanked: 185 time(s) in 166 post(s)
9.0.79 issues with spot log.....

The spot log with some frequencies displays the band as a horizontal line. Looks like the band table is hosed up.
Spot for 7.185 Mhz shows band as 40M, but spot for 7.134 Mhz shows band as __ . Spot for 3.79 Mhz shows band as __, same for 3.77 Mhz, same for many other frequencies.

FYI - Scrolling over in the spot log to the error column (forgot about that being there) has all the above with the error "Freq not on band table". Will look at the table and see what's missing or what freq's ranges changed....

Brad, N8GLS
Back to top
WWW
WN4AZY
#14 Posted : Friday, October 9, 2015 8:36:26 AM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
Hi Brad:

Either the format of the spot is wrong, or your band table is hosed.

Quote:
Spot for 7.185 Mhz shows band as 40M, but spot for 7.134 Mhz shows band as __ . Spot for 3.79 Mhz shows band as __, same for 3.77 Mhz, same for many other frequencies.


Does the spot log actually have underscores in it, or just indicating that it displays as blank?

Look at the raw spot in telnet or on the web browser, and make sure that is OK. Chances are something is wrong there. If not, make sure that you have a band table entry that encompasses the frequencies in question. It is interesting that all of the frequencies you mention fall outside the General portions of the band. Maybe it is the band table.

http://www.arrl.org/file...hart/Hambands_color.pdf

BTW, I don't think there is anything with the updates that would affect this.

Let me know.

Tnx & 73,

Dennis WN4AZY
Back to top
WWW
N5XZ
#15 Posted : Friday, October 9, 2015 12:42:43 PM(UTC)
Rank: Advanced Member

Groups: Registered, Beta Testers
Posts: 409
Location: Richmond, TX

Thanks: 35 times
Was thanked: 57 time(s) in 54 post(s)
9.0.79 working good at my QTH.

Now hopefully Dennis can get back to other LOGic enhancements.

Thanks,
73, Allen N5XZ
Back to top
WN4AZY
#16 Posted : Friday, October 9, 2015 6:04:47 PM(UTC)
admin

Rank: Administration

Groups: Administrators, Beta Testers
Posts: 3,097
Man
Location: Auburn, GA

Thanks: 998 times
Was thanked: 497 time(s) in 412 post(s)
There was another error

PDA.LOGicPrefixCallsignDBLookup: Object reference not set to an instance of an object...

that I had trouble tracking down. I finally reproduced it and fixed it. Pse download .79 again. It didn't get a new version number as the error was in a DLL, and I did not recompile LOGic proper.

Tnx & 73,

Dennis WN4AZY
Back to top
WWW
K8ZM
#17 Posted : Saturday, October 10, 2015 12:09:52 AM(UTC)
bwilliams

Rank: Advanced Member

Groups: Registered
Posts: 524
Location: Mentor, OH

Thanks: 123 times
Was thanked: 185 time(s) in 166 post(s)
Dennis,

Ok, well, I'm baffled. The spot log raw data was correct. The Band table had some set to the General portion of that band, clueless as to how that happened. I don't ever remember seeing the Spot Log displaying an underscore (or blank), anyways, I changed the band table and all seems fine......thanks !!

Brad, N8GLS
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF 1.9.5.5 | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.295 seconds.